Andis 24675 UltraEdge 2‑Speed Clipper Review: solid workhorse for home grooming… with limits

I bought the Andis 24675 UltraEdge 2‑Speed mainly because I was tired of fighting with cheaper pet store clippers that bog down every time they hit a thick patch of fur. I groom at home to save money and avoid leaving my dog all day at the groomer, so I needed something closer to what pros actually use, but still simple enough that I wouldn’t need a course to operate it. On paper, this one ticks a lot of boxes: two‑speed rotary motor, detachable blades, long cord, and it’s supposed to run cool and quiet.

In practice, it’s a pretty straightforward, no‑nonsense clipper. No fancy display, no battery, just a corded unit with a simple ON/OFF switch and a speed toggle. I used it mostly on a doodle‑type coat (curly, dense, mats if you blink) and tried it on a shorter, wire‑ish coat too. I also tested it a bit on faux fur for costume work, just to see how versatile it really is, since a few people online mentioned that use case.

Overall, it gets the job done, but it’s not perfect. It definitely cuts better than the cheap Wahl kits I used before, and it feels more like something that belongs in a groomer’s setup. But depending on what kind of dog you have and how long your sessions are, there are some trade‑offs: heat build‑up, weight, and the fact that you’ll probably need extra blades or combs to really make it useful. Also, the manual for removing the blade is not great, and I can totally see how someone could hurt themselves if they follow it blindly.

If you’re expecting a magic solution that makes grooming a giant standard poodle in one quick session painless, this is not it. If you want a solid corded clipper that can handle most home jobs pretty well, as long as you take breaks and maintain your blades, it’s a decent pick. I’ll break down what worked for me and where it annoyed me so you can see if it fits your situation.

Price‑wise, the Andis UltraEdge 2‑Speed sits in that mid‑to‑pro range: clearly more expensive than the generic pet‑store kits, cheaper than some high‑end cordless or 3‑speed pro models. For what you get—strong motor, detachable blade system, long cord, and a brand that pros actually use—I’d say it’s pretty solid value if you’re grooming small to medium dogs or doing regular touch‑ups on a couple of pets. The fact that some people bought it instead of paying for a groomer, and it basically paid for itself in a few sessions, makes sense to me.

Where the value starts to feel weaker is if you own a big, high‑maintenance breed like a full‑size standard poodle and you’re expecting this to handle long, intensive sessions without complaint. One reviewer who replaced an older Andis 3‑speed was clearly disappointed: their old unit could run around three hours before really heating up, while this one gets too hot in about 20 minutes of solid work. If you’re spending 6–8 hours to fully groom a giant poodle because you keep having to stop for heat, the cheaper price compared to a high‑end pro clipper doesn’t feel like such a deal anymore.

You also have to factor in the extra costs: more blades (different lengths), snap‑on combs, coolant or extra oil, and some kind of storage case. The clipper alone is not a complete grooming setup. If you already have Andis‑compatible blades and combs from an older model, the value jumps up because you can just plug this into your existing kit. If you’re starting from zero, expect to spend more on accessories to really get the most out of it.

Compared to cheaper brands, this does cut better and feels sturdier. Compared to top‑tier pro gear, it’s more of a budget workhorse with limitations. So in terms of value: good for typical home users with 1–2 dogs and moderate grooming needs, not the best choice if you’re basically running a one‑dog grooming salon on a large, dense‑coated breed every month.

The design is very “pro shop” rather than “cute pet store gadget.” It’s a straight, black, slightly chunky clipper with a shatter‑resistant plastic housing. No rubber grip, no fancy curves, just a basic cylinder‑ish body. The upside is that it feels sturdy and can probably survive a couple of accidental drops off the grooming table. The downside is that it’s not the most ergonomic thing if you’re doing a full‑body groom on a big dog. After about 30–40 minutes, I started feeling it in my wrist and fingers, especially on the higher speed.

The 14‑foot heavy‑duty cord is actually one of the best things about the design. It’s long enough that I could move around my dog and the table without constantly yanking on an extension cord. The cord is thick and feels durable, not like it’s going to fray in a year. But being thick also means it’s not super flexible, so it can drag a bit and you have to be aware of where it is so the dog doesn’t get tangled or step on it.

The detachable blade system is a big plus, but the way it’s explained in the manual is not great. The instructions say something like: hold down the release and push the blade down, then pull forward. In reality, what worked for me (and lines up with what other users found) is: hold the release and pull the blade up and away, more like unhooking it. If you do it the way the paper says, you end up pushing your fingers toward the sharp edge, which is just asking for a cut. Once you figure out the right motion, though, swapping blades is quick and easy, and that’s key if you want different lengths or need to switch out a hot blade mid‑groom.

Noise‑wise, the design is decent. On low speed it’s reasonably quiet for a corded professional‑style clipper. Most dogs will still notice it, but it’s not a screaming buzz like some cheap units. On high speed it’s louder, obviously, but still in a range that my dog tolerated without panicking. There’s a slight vibration, but nothing extreme. So design verdict: solid and functional, but not super comfortable for long sessions, and the blade release instructions really should be clearer to avoid injuries.

From the user side, comfort is mixed. The clipper is not insanely heavy, but at just under 2 lbs plus the drag of the heavy cord, you definitely feel it over time. For a small dog or a quick trim, no big deal. For a full standard poodle or a doodle that hasn’t been groomed in a while, my hand and wrist were complaining by the end. There’s no soft grip, no contouring for fingers, just a straight plastic body. If you have wrist issues or small hands, that’s something to think about.

Vibration is moderate. I’ve used noisier and shakier clippers before, so this felt relatively controlled. On low speed, it’s pretty manageable and feels fine even for detail work around the face. On high speed, you get more buzz, but that’s normal. I didn’t feel like it was numbing my hand, but after 45–60 minutes I definitely wanted a break. If you’re used to lighter cordless clippers, going back to a corded block like this will be noticeable.

For the dog, the two important comfort points are noise and heat. Noise is okay. My dog doesn’t enjoy grooming, but he didn’t freak out more than usual with these. Compared to my old corded Wahl, the UltraEdge on low speed was a bit quieter and had a lower‑pitched hum, which seemed to bother him less. On high speed it’s louder but still reasonable. I wouldn’t use it right next to a super noise‑sensitive dog’s ears for long, but for body work, it’s fine.

Heat is where things get tricky. For short sessions, the blade stays at a safe temperature, especially if you oil it properly and keep the coat clean and dry. But over time, especially on dense coats, the body warms up and passes that heat through the blade. One reviewer described it like being touched by a hot curling iron, and I get what they mean if you push it for too long without a break. My workaround was: keep two blades on hand, swap them out often, and let one cool while I use the other. That helped a lot, but it’s an extra step you have to manage. So comfort is fine for casual home use, not great for marathon grooming sessions.

Build‑wise, the Andis UltraEdge feels like it’s meant to last a while if you treat it right. The housing is thick plastic that doesn’t flex, and the shatter‑proof claim seems believable. I didn’t throw it on the floor on purpose, but it did take a small fall off a low table once and survived without any cracks or weird noises afterward. The cord is heavy‑duty and looks like it can handle being coiled and uncoiled a lot, as long as you don’t kink it or slam it in a drawer.

The motor itself feels strong and consistent. I didn’t notice any power drop over several grooming sessions. Other Andis models are known to last years if you keep them clean and oiled, and I’d expect similar here, though some reviewers clearly feel it’s a step down from older 3‑speed models in terms of how long they can run before overheating. That’s more a performance limitation than durability, but it does affect how “tough” the clipper feels in real use. If you constantly push it for hours on a big poodle, long‑term stress on the internals might show up sooner.

Maintenance is simple but not optional. You need to:

• Brush hair out of the blade and vents after each use.
• Oil the blade regularly (a few drops along the teeth and sides while running, then wipe off excess).
• Occasionally remove the blade and clean underneath.
• Let it cool if the body or blade get too hot.

One thing to note: blades themselves are a separate durability topic. The included #10 works, but like any steel blade, it will dull over time and can rust if you don’t oil it. A couple of users mentioned they bought spare blades so they could swap mid‑groom; that’s smart from both a heat and longevity standpoint. Overall, the clipper body seems pretty solid and capable of lasting years at home, but only if you’re willing to do the basic upkeep and not treat it like an indestructible tank.

This is where the clipper is mostly good, with some clear limits. On shorter sessions and medium coats, it cuts through fur very efficiently. On my cockapoo‑type mix with a thick, curly coat, I could get the main body clip done in around 15–20 minutes once the coat was clean and brushed out. Compared to my old budget Wahl kit, the difference was obvious: less snagging, fewer passes over the same area, and far fewer times where the blade just stopped moving through the fur. The motor has enough power that you feel like you’re actually shaving, not just polishing the top layer.

Where it gets tricky is with long, dense, or full‑body jobs on bigger dogs. On my friend’s large doodle and on a standard poodle coat, the clipper did cut, but after roughly 20–30 minutes of continuous work (even swapping blades every few minutes), the body started to feel hot, and the heat travelled into the blade. One Amazon reviewer mentioned their older 3‑speed Andis could go around 3 hours before getting too hot; this 2‑speed model clearly doesn’t hold up the same way. I wouldn’t call it unusable, but you do have to plan breaks, especially if you care about your dog’s comfort and don’t want a blade as hot as a curling iron touching their skin.

On the lower speed, the clipper is smoother and a bit cooler but also slower. I mostly used low around the face, paws, and sensitive zones, then switched to high for the body and thicker areas. For matted spots, you still need to work carefully; this isn’t a magic mat eraser. If you try to plow straight through big mats, you’ll either tug the dog or stress the motor. Pre‑brushing and dematting is still required if you want clean lines and no pulling.

Interestingly, the clipper also works pretty well on faux fur, which lines up with the review from a fursuit maker. I tried it on a scrap of long‑pile faux fur, and it gave a reasonably even shave after a couple of passes. So if you do crafts or costume work on the side, it doubles as a decent fabric shaver. Overall performance: strong enough for home grooming on most dogs, but if you’re doing marathon sessions on a big, dense‑coated breed, the heat and weight will slow you down a lot.

Out of the box, the Andis 24675 UltraEdge is pretty barebones: you get the clipper body, a size 10 detachable blade already mounted, the attached 14‑foot cord, and that’s basically it. No storage case, no comb guards, no blade coolant or oil bottle worth mentioning. For the price, I would have liked at least a basic case or a couple of combs, but you’re clearly paying for the motor and the Andis name, not accessories. If you’re new to grooming, be ready to buy extra blades or snap‑on combs right away, because the #10 blade alone will leave the coat very short.

The unit itself feels like a compact brick: around 2 lbs, which doesn’t sound like much until you’re holding it above a wiggly dog for an hour. The housing is plastic but feels solid enough, not flimsy. There’s a simple two‑speed control and the classic Andis detachable blade system. If you’ve used Andis before, it’ll feel familiar; if you haven’t, there’s a small learning curve, and the included instructions for removing the blade are honestly not very clear. One Amazon reviewer even cut themselves badly following the manual, and I’m not surprised after trying it their way once.

Function‑wise, the promise is: two‑speed rotary motor, runs relatively cool and quiet, and works on all breeds and coats. I’d say the first two claims are mostly true if your grooming sessions are short to medium and the coat is properly washed, dried, and brushed out beforehand. The “all breeds and coats” line is a bit optimistic. It can handle thick coats, but if you’re working on a full‑size standard poodle or anything similar for hours, you’ll hit its limits with heat and hand fatigue.

So in terms of presentation, it’s a no‑frills professional‑style clipper sold to regular people. Just don’t expect a full grooming kit. Think of it more as buying the main tool and then building your setup around it with extra blades, combs, oil, coolant, and some kind of storage solution.